Posts

Showing posts with the label Rear Shock Absorber

DIY Roadside Assistance for Bikers | Emergency Bike Repair Guide

-
Image
🏍️ DIY Roadside Assistance for Bikers       Introduction  Hello friends, welcome to Rajesh Technical Blog. Today, I will explain DIY Roadside Assistance for Bikers and how you can handle bike problems on the road without depending on others. Every biker faces unexpected issues like punctures, low battery, or engine problems. In such situations, knowing basic roadside assistance can save your time, money, and stress. 🔧 What is DIY Roadside Assistance? DIY (Do It Yourself) Roadside Assistance means solving small bike problems by yourself during emergencies on the road. 🚨 Common Problems Bikers Face Flat tire (puncture) Low tire pressure Dead battery Loose chain Engine not starting 🧰 Essential Tools Every Biker Should Carry To handle roadside problems, always carry: Tire repair kit Portable air pump Basic tool kit (spanner, screwdriver) Torch or flashlight Power bank ⚙️ Basic DIY Fixes 1. Fixing Flat Tire Use a tire repair kit to seal...
Post a Comment
Read more

Step by step method to make rear sleeper of Hero Glamour bike

-
Image
           Indruction  Hello friends, welcome to Rajesh Technical Blog Today I will tell you how to make or repair the rear shock absorber of Hero Glamour bike step by step. This simple method will help you check, clean, and fit the rear suspension system easily at home. Step 1: Remove the Seat and Side Cover First, remove the seat and side panel of your Hero Glamour. This gives access to the top nut of the rear shock absorber. Step 2: Loosen the Top Bolt Use a proper wrench to loosen the top bolt. Make sure the bike is on the main stand for safety and stability. Step 3: Remove the Lower Bolt Now remove the lower bolt of the shock absorber carefully. Hold the shock with one hand to avoid sudden movement. Step 4: Check the Shock Condition Inspect the shock absorber for oil leakage, spring damage, or weak damping. If it is leaking or very loose, it needs repair or replacement. Step 5: Clean and Refit Clean the shock with a dry clo...
Post a Comment
Read more